Like asphalt, composite roof shingles are cost-effective and simple to install. But they also have a range of other benefits. Here's what you should know about these synthetic shingles.
The post Composite Roof Shingles: What You Should Know appeared first on Today's Homeowner.
Social distancing isn’t just responsible; it also offers the perfect opportunity to address our backyards.
Here are five projects to tackle.
The post 5 Backyard Projects to Do While Social Distancing appeared first on Today's Homeowner.
Wondering, "How can I sell my home quickly?" Follow these tips from leading HomeLight real estate agents to help you conquer your spring home sale.
The post Tips to Sell Your Home During COVID-19 appeared first on Today's Homeowner.
If your detached garage’s roof is starting to age, it may be time to consider a new one. Here are some popular options.
The post 5 Durable, Affordable Roof Options for a Detached Garage appeared first on Today's Homeowner.
I am absolutely loving having a garden. I usually spend the last part of my day, down in the garden watering everything.
However, the problem with this method is that it depends on my being in town to water every day. Also, it dispenses a large amount of water over a short duration of time. Which means that it typically pools at the base of the plant and then runs off away from it.
So instead, I have now installed a drip irrigation system that dispenses a large quantity of water but over a long duration of time. Mine runs for one hour.
This way of watering allows water to be absorbed down deep into the soil, which motivates the plant to establish deeper roots to reach the water. It’s also a far more efficient way to use water.
Let me give you an overview of my system, and then I’ll show you how I installed it.
Things I Used in This Project:
My watering source is my Rain Water Collection Tank. Then there is a pump that pumps the water back uphill to my spigot.
From here I filter and reduce the pressure of the water and then direct it to the beds in the solid tubing. This runs along the back of every bed.
From there, a piece of solid tubing runs down the middle where a few links of drip hose are plugged into it.
This hose is smaller in diameter and has spaced out perforations that will allow water to drip out of it when the system is turned on.
You can find a kit with these hoses and fittings HERE. Now let’s get into how to put it together.
Starting with the spigot, let me give you a breakdown. I have a splitter because I still want the ability to be able to walk up to the spigot and be able to turn it on.
Then there is the filter to filter out sediment. There is also a timing device to tell the water when to kick on. A regulator, which reduces the pressure of the water down to 25 PSI. And then also a splitter, which directs the water left and right.
Once you decide how you want your system to look, take it all apart and apply a few layers of teflon tape to each of the threads to help prevent leaks.
Next I’m going to run the main water supply line through the back of each bed. I drilled a hole through the back of each planter, which will feed the main supply lines to each bed.
At the center of each bed, there will be a T fitting, which will direct water down the center of the bed to drip fillings to dispense the water.
This is a valve that will allow me to turn the water off to a particular bed if I dont have anything planted at that time to water.
The drip hose has holes punctured through it to allow water to escape out of it. On one end, we’ll put a valve, which will go into the main water supply line. The other end will receive an end cap.
So let’s punch some holes in the main water line to connect the two components. This little guy punches holes in the side for the drip system.
You can place the drip lines at the spacing you like. I made all of mine the same and placed them with 4 per bed.
Now you can take the drip irrigations lines and place them into the holes that we made in the main irrigation line.
The drip hose can now be staked down into place. There are plastic holders you can buy – and I did actually. But after I ran out, I grabbed bailing wire and made my own by rounding over the top and sticking it into the ground.
I positioned the drip hoses so that the outlets were closest to my plants. Also, don’t push them all the way to the ground. Keep them standing up just a bit so the holes are less likely to get dirty and clogged.
Once the entire system is in place, the last thing is to turn it on and check for leaks. Water should only come out of the perforations of the drip hose.
Your climate and what you are growing should determine how long you should let you system run. I have mine set to run for one hour at 4 am every day. Now that it is summer, I might have to run it a second time.
It’s so cool how well this system works. My garden is just looking fabulous. So if this is on your to-do list, it’s actually a very quick and easy process.
If you’d like to see how I built these gardens, check out these links:
Thanks for watching! I’ll see you on my next project.
If you haven’t already, don’t forget to sign up at the top of this page for my newsletter so you don’t miss new projects!
(Most of the links listed above are affiliate links. As an Amazon Associate I earn from qualifying purchases. Thank you for supporting me in this way.)
The post Easy Drip System Garden Irrigation appeared first on Wilker Do's.
Refreshing your home’s front entry doesn’t require tons of work. These simple changes can make a big impact.
The post Easy Ways to Refresh Your Home’s Front Entry appeared first on Today's Homeowner.
These stained concrete stools are inexpensive, take a few hours over two days to make, and look great in the backyard. Here's the step-by-step guide!
The post How to Create Colorful Concrete Stools appeared first on Today's Homeowner.
Did you know there are some beneficial critters in your yard?
Don’t get rid of these three garden helpers that offer natural pest control.
The post Natural Pest Control: 3 Critters to Help Your Garden appeared first on Today's Homeowner.
Every homeowner wants a beautiful, thick lawn. Unfortunately, people often make these common lawn care mistakes that undermine that goal.
The post 9 Biggest Lawn Care Mistakes — And How to Avoid Them appeared first on Today's Homeowner.
In this tutorial I’m going to be showing you how I made a face mask. Now I’m not a seamstress and this is my first time sewing, but I was able to do this. So if you are interested in making some for yourself, friends, family or medical care workers in your area that are needing masks, I hope this tutorial can help you out.
Check out the video above for the full tutorial…. and laughs from my mom and I!
Visit https://filti.com and use code april to receive 10% off your order. You can make 50-80 face masks with one roll then donate them to your local community in need.
Some helpful Tutorials (if your local organization doesn’t have a requested pattern): https://www.unitypoint.org/filesimages/COVID-19/UnityPointHealth-OlsonMask-Instructions.pdf https://anest.ufl.edu/wordpress/files/2020/03/PROTOTYPE-2-TUTORIAL.pdf https://masksnow.org/patterns/ https://www.hopkinsmedicine.org/coronavirus/_documents/INF2003076_VW_Hand-Sewn%20Mask%20instructions-1.pdf
Hospitals requesting masks (created by some amazing public health graduate students): https://docs.google.com/document/d/12a5YO0Z9RpHZk9Zkzl4NOj9CbjzhFfoKjPLFFC-21LU/edit#heading=h.rffvqipq174v
The post Making a Face Mask with Mom for Good Cause | DIY Face Mask Tutorial appeared first on Wilker Do's.
If you’re uncomfortable in your home and changing the thermostat doesn’t help, it may be due to these five sources of air leaks.
The post Air Leaks: 5 Ways A/C Escapes Your Home appeared first on Today's Homeowner.
Cleaning your home’s exterior may seem daunting, but it doesn’t have to be. Work smarter, not harder, using these easy, time-saving tips and products.
The post Easy Ways to Clean Your Home’s Exterior appeared first on Today's Homeowner.
Landscape drainage work is not for the faint of heart, but Flex-Drain Pro Solid Drain Pipe makes it easier. Watch Jodi Marks' review.
The post Flexible Pipe Makes Landscape Drainage Work Easier appeared first on Today's Homeowner.
In this video I’m going to be going over the very impressive Logosol chainsaw mill.
I love milling. I fell in love with it after building my bandsaw mill, but to have a piece of equipment that’s this put together, well thought out, and accurate, makes me giddy. Let me take you through it’s features, my experience on using it, and why I wanted a chainsaw mill when I already have a giant bandsaw mill.
Actually, let me start there. If you haven’t been following my channel, I built a giant bandsaw mill that has a large cutting capacity. It is a tank and wonderful to have such a big piece of equipment in my arsenal however, it is definitely not portable.
I have to always bring the logs to it and I’ve sometimes found that to be a challenge so one of the biggest advantages to a chainsaw mill is that it can travel to the log(s).
I’ve used a few chainsaw mills on the market. I made a video on using the Grandburg last year and that is worlds and above better than using a home made rig such as a ladder.
But it’s only a portable flat referencing surface whereas this Logosol is an all in one milling machine.
It’s durable and stable, meaning accurate. It’s holds the log off the ground for easy milling, it has a built in lift system, it doesn’t rust, it’s dirt repellent so there is zero maintenance, and on top of all of that….it’s portable. Do you see why I’m giddy?
Logsol is a Swedish company and I attended an annual conference of theirs last year where I first got to see the equipment and put my hands on it. And just a side note, if you’re impressed with this unit, just wait until you see their other mills like the bandsaw mill or their wide slabber….they are all this well thought out and functional.
One huge advantage to a chain sawmill over a band sawmill is it’s portable. This F2 Logosol can be dissembled so that the entire unit can fit into the back of a truck or even in the back of an SUV. This way, when I get a call about logs but they are in a location where getting a truck and trailer isn’t an option, I can park in front and carry the mill to the spot with the logs.
Or more commonly, if I get a call about several good logs but hours away…..instead of having to make multiple trips to get the logs back home on a trailer, I can load this up, spend the day slabbing on site then just stack the trailer full of cut slabs to bring home.
The entire unit is made with aluminum which not drastically cuts down on the weight but it also means you can leave it outside indefinitely without it rusting.
So no need to pack it up or cover it up after a day of milling. Dirt doesn’t stick to it either, so you can easily wipe it off, grab your chainsaw and head in for the day. I’ve currently had my mill sitting out for months now and it looks just as beautiful as the day I first got it.
Now lets talk about features. Oooooh this mill is slick. Being around tools and equipment for a minute now, I can certainly appreciate a well thought out tool that not only does what it’s suppose to do accurately, but is also easy to use, and bonus points if you can make it look this sharp and beautiful at the same time.
This mill comes in different length options but I opted for the shortest length which is 4 meters (or 13 feet). The longest is 6 meters or just under 20’. But it’s worth noting and again acknowledging Logosol for their thought process, that the F2 is built with a smart module system that allows for different extensions so there are multiple options for extending the wings up to 2 additional meters.
So you could keep it at it’s full length, or you could keep it at it’s most compact size then quickly add on an extension should you catch a big tree.
For holding down material, the mill comes with a really savvy cam locking system on a sliding track system so that you have plenty of flexibility, no matter where the log end lands, to slide the clamp up against it, tighten it on the track, then lever over the cam lock to hold it securely in place.
One of my favorite features is adjusting for the depth of cut. Both of the legs, or all if you have the third on, have a ruler attached so that it is extremely simple to not only keep the log level from end to end, resulting in a straight cut, but also to set up for whatever thickness of slab you want.
You adjust the height by turning the handles on each leg which is lifted up by way of a ratcheting system. Every time you hear a click, the log has been lifted 1/4”. So after making a cut, if I want a 2” slab, I turn the handle 8 clicks, then listen for 8 clicks on the other then start on the next cut. I personally love the sound association, it is quick, easy, and accurate, but if you lose track of clicks then of course looking at the ruler to set the depth is another way of easily doing it.
For the chainsaw: there is a light weight saw carriage that comes with the mill that very quickly attaches to your chainsaw and allows it to slides effortlessly along the track in a very smooth and straight fashion.
There is also an attachment that can be added which will reach out and hold onto the end of the bar to give it more stability to make a straight cut.
Of course when you’re milling, it’s important to have the bar of the chainsaw cutting through the wood straight. If it tilts then you’ll end up with a tapered cut on your slab, which is not only a waste but also causes more work when you go to use the slab. So on your set up, it’s important to have the wings flat and straight, since that is the reference for the carriage, but it’s also important to have the bar stabilized. Then if those two things are good, you’ll just need to focus on the feel/sound of the cut and adjust your pace to either speed up or slow down.
Since I mentioned set up, lets cover that real quick. The mill comes in a few different boxes with all of the components clearly labeled and laid out.
It might look like a lot when first opening up everything and getting started, but the assembly instructions are by far some of the best I’ve worked with so it came together very easy.
I was continuously impressed with the smart solutions for joining things together, adding stability but keeping it lightweight, and how all the parts fit together like a glove.
It is a great sign that as I was assembling, I got a buzzed excitement about how well it’s going to work, purely based off the level of quality and obvious attention to detail, that came through by handling these parts.
To use the mill, you place the log on the bed, spanning the two legs, clamp it down with the cam locks, then make your face cut which gives you a top flat plane.
I would personally lift the chainsaw carriage up on the wings and get it set into the tracks, then start the engine in place. For moving the carriage you can either move it manually by pushing it or the mill comes with a winch system that can be installed which goes from the carriage to the end of the wing and back so that you can crank on the handle to feed it through the cut.
After making it to the end of the cut, you can remove the log then slide the saw back to the start position before using the lift system to raise the log up to the slabs thickness.
Of course the speed of cut will be vary depending on the saw you have, the diameter, length, and hardness of wood you’re cutting but here I was cutting Texas Mesquite which is one of the hardest woods on the Janka Hardness scale and it was taking me just at a minute to make a cut. So not very much time at all to go through this entire log.
Now I think it’s incredible that the mill can handle such a long log, but if you’re like me and also have some short stock, a simple work around is to make a quick and cheap jig out of 2x4s or 2x6s to lay in between the two legs. This will cradle the log so it won’t roll away but also allow it to span between the mill’s legs. This jig is simple enough to set into place but then I just toss it to the side until it’s needed again.
Now for comparisons. I mentioned the Grandburg system earlier. That system is a little bit less expensive and will provide you a portable flat reference to cut slabs from. However, it doesn’t come with a way of holding the log stable, or up off the ground.
Once you get into milling, you’ll quickly realize how important log holding can be. It is light weight and definitely portable but now that I’ve been using this all in one Logosol F2 for the past few months, I can’t imagine going back to anything else. And that’s why if you’re serious about milling as a side gig or even a full time gig, then I definitely recommend Logosol. It’s at a convinent height. It’s light weight, portable, and I love love love that I can leave it set up out in the woods without it rusting or causing problems.
All I have to do is tote the saw in after I’m done, then carry it back out when I’m ready to go again.
If you’ve been following along with my story then you’ll know that I’ll be selling slabs at my new commercial building called The Wood Shed, so if you’re interested, then yes these slabs will be for sale. And yes, I am interested if you’re in the area and have logs to slab up.
But also, Logosol is a Swedish company that so far has a distributor on the East coast and the West coast but nothing in Central. However, I have been so impressed by this piece of equipment as well as the company themselves that I will be stocking inventory of the F2 Chainsaw mill at The Wood Shed as well. So if you would like to see the mill in person prior to purchasing one, please feel free to drop in. I’ll be happy to walk you through the unit in person.
I am so proud to be partnering with the best milling brand on the market:
I will also have inventory at The Wood Shed that can be purchased once Covid-19 has passed and I can open my doors.
Find out more about The Wood Shed here: https://youtu.be/l3Rm8avK6kM
If you are considering getting into milling or are in milling and was hoping to learn about the F2, then I hope this video was helpful. I’ll see you on whatever I’m working on next.
If you haven’t already, don’t forget to sign up at the top of this page for my newsletter so you don’t miss new projects!
The post My favorite Chainsaw Mill – Logosol F2 Walk Through appeared first on Wilker Do's.
Preconceived notions are dangerous for homeowners choosing a new roof.For some, there is a common misconception they must forego safety over style. Why not have both? Today’s Homeowner debunks some of the most common myths about metal roofing. Plus, we nail down some interesting facts you may not have heard along the way. Metal Myth […]
The post Metal Roofing Myths: Separating Fact from Fiction appeared first on Today's Homeowner.
Backyard living without too much maintenance is a must if you love the outdoors. Fortunately, creating a beautiful outdoor oasis is easy with composite decking. A lot of homeowners want a deck, but don’t want the endless sanding, staining or painting that goes with it. The solution is mold- and mildew-resistant composite decking. It offers the beauty […]
The post Create an Outdoor Oasis with Composite Decking appeared first on Today's Homeowner.
It's hurricane season — how are you protecting your home?
Tackle this hurricane prep list now, so you don’t have to worry about these things later.
The post Hurricane Prep List: What You Should Do Before the Storm appeared first on Today's Homeowner.
If you want privacy from neighbors, additional gardening opportunities and to decorate your backyard, this project has it all.
The post How to Build a Lattice Privacy Wall appeared first on Today's Homeowner.
We're helping a family improve the curb appeal on their 1970s modern rustic home. Check out the before and after!
The post Rustic Curb Appeal Makeover: From Blank to Beautiful appeared first on Today's Homeowner.
Want to give your home some rustic curb appeal? Then build these slatted shutters. Watch Danny Lipford's how-to video for the step-by-step process!
The post How to Build Slatted Shutters in 6 Steps appeared first on Today's Homeowner.
A leaf blower and some plastic downspout are all you need for the fastest and best way to clean gutters. Watch Joe Truini's Simple Solution for this tip!
The post The Best Way to Clean Gutters appeared first on Today's Homeowner.
If you want to move a lot of leaves fast, a backpack leaf blower is the way to go. Watch Jodi Marks' review of Ryobi's 40V Lithium-ion Backpack Blower!
The post This Backpack Leaf Blower Has Everything But Gas appeared first on Today's Homeowner.
